160amp, 200amp Mig/mag/flux/lift Tig/mma 5 In 1 DC Inverter Welder Gas Gasless

160AMP 200AMP MIG/MAG/FLUX/LIFT TIG/MMA DC INVERTER WELDER. 5 IN 1 DC IGBT WELDING MACHINE. If you order and pay before 2:00pm we dispatch your item in same day. This is a quality DIGI synergic.

Welding machine which is very easily operated. Garage, farm, mobile technicians, DIY and other repair services. DC Inverter welder 5 IN 1. DIGI Synergic System control: the. Current, voltage and feeding speed can be.

Get matching each other so very easy to use. Gives precise adjustment of output voltage to give control of heat input. Full protections: over current protection, over heat protection and over load protection.

Allows use of self shielding flux cored wires for outdoor applications. Feed wire speed can be adjustable. Wire diameter size range: 0.6/0.8/1.0(mm). 0.6/0.8(mm) for MIG-160, 0.8/1.0(mm) for MIG-200.

Wire reel size can be up to 5kg. Soft start - When MIG welding wire only feeds slowly until the welding arc has been established. MIG torch for MIG-160 or. TIG arc start method: Lift Please note the TIG function is lift arc start, not High Frequency ignition arc start. AUTO ARC FORCE, HOT START and No stick technology.

Usable electrodes on MMA mode: 1.6 - 3.2mm (MIG-160). 1.6 - 4.0mm (MIG-200). IGBT technology inverter - more efficient and easier to use than a transformer or MOSFET.

Fitted with a 3 pin 13amp UK standard plug. Compact portable design and light weight. Provides very smooth low splatter welds on all steels due to its inverter technology.

This machine is not suitable for welding aluminium and aluminium alloys. Rated Duty Cycle (25C °). 440 x 180 x 297. Specification of Argon Gas Regulator.

Applicable Gas: Argon gas or Argon/Co2 mix gas. Output Pressure: 0.25MPa+/-0.05MPa 2.5+/-0.5kgf/.

Output Flowing rate: 025 L/min. Please carefully check this regulator photo and specification to make sure it can fit your gas bottle cylinder before adding it to your order as. Not this regulator can fit all gas bottle cylinders and also this regulator is suitable for Argon or Argon/Co2 mix gas but not suitable for pure Co2 gas.

Specification of Lift TIG Torch. Model: WP-17V Valved TIG Torch. Power Plug Dinse Size: 10/.

Gas hose copper nut size. Gas control: Turn on/off the valve on the torch neck. Suitable for Lift ARC start TIG welding (not suitable for HF ARC start TIG welding). 3 x Ceramic Cups 4/5/6. 3 x Collets 1.6/2.0/2.4mm.

1 x Collet Body 2.4mm. 1 x Long Back Cap. 1 x Short Back Cap. ANDELI MIG-160 or 200 DC inverter Welder, 2m 14AK fixed MIG Torch (MIG-160) or 3m Euro Connector. Torch (MIG-200), 2m Earth Lead, 2m MMA Lead, Instruction manual, Wire Brush, Welding face mask.

The 3m valved lift TIG torch and the gas regulator just come with your order once you have selected them. LOOKING FOR OTHER SIZE OR DIFFERENT TYPE OF INVERTER WELDER. Bank Transfer, Personal Cheque and Postal Order (UK Buyers ONLY). P&P cost is received and cleared. In the majority of cases goods are dispatched within 24 hours (Mon-Fri).

Buyers are responsible for paying the custom duty if located outside UK. We try to answer all the emails within 24 hours after receiving. This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\MIG Welders". The seller is "wlqy6688" and is located in this country: GB.

This item can be shipped to United Kingdom.

Model: MIG-200
Argon/Co2 Mix Gas Regulator: Without
Valved Lift TIG Torch: Without
Brand: ANDELI