HITBOX HBM1200 MIG Welder construction organization of airless self-protected welding is simple, no wind-proof measures such as preparing wind shelters, gas cylinders, etc. Are required, and the welding efficiency in the field is high. And the welding quality is good.
Since welding defects are often prone to welding joints, especially the number of manual downward welding joints of steel pipes of the same pipe diameter is more than the number of semi-automatic welding joints, the use of semi-automatic welding reduces the probability of defects. The commonly used HOBART 81N1 (Hebert 81N1) welding wire is a low-hydrogen metal welding wire. It can be seen that semi-automatic welding can reduce the hydrogen content in the weld.
At the same time, the semi- automatic welding heat input is high, which can reduce the cooling rate of the weld, and help the escape of hydrogen, reduce and prevent cold cracks. Model: HBM1200-II (added of digital display).
Package weight: 7.15KG (15.70LB). Package size: 42.5x19.5x36.5cm(16.737.6714.37in). Function: Gasless MIG / Lift TIG /ARC.
Feeding speed adjustment range(m/min): 1.5-16. Welding wire diameter(mm): 0.6/0.8. Electrode Diameter(mm): ø2.5, ø3.2. Welding materials:Iron, stainless steel, galvanized sheet, carbon steel and other metals. Why should choose HITBOX HBM1200-II welder?LED digital display + full-digital control system to realize precise control and stable arc length during welding. 60% Duty Cycle, great reduction in metal loss obviously enhances the welding efficiency and energy saving effect. Closed loop feedback control, constant voltage output, workable under network voltage fluctuation within ± 15%. Inverter frequency id 35 KHZ, greatly reducing the volume and weight of welder. Unique dynamic characteristic control circuit is used in gas shielded arc welding, stable arc, little spash, good ahping, efficent welding.
Switching frequency is beyond audiorange, which almost eliminates noise pollution. Perfect For Home, Auto Repair Shop & Other Welding Shop. Please note: when use mig function, please connect the earth clamp to the positive pole"+". Inverter mig welder Dual voltage 110V 220V, machine carries MIG/ARC/TIG function in one. MIG(Synergic)mode: no gas iron welding, using 0.6/0.8mm flux cored wire to weld 0.8-3.0mm thickness metal, duty cycle:50%.TIG mode: connect Argon gas to weld 1.0-3.0mm stainless steel. ARC mode: using 1.0-2.5mm rods to weld 1.0-5.0mm metal. MIG welding: 0.56mm iron and mild steel plate. Lift TIG welding: 14mm stainless steel plate. ARC welding: 2.5mm acid electrode like J422 E4303 6013. What's included with the package? 1X Mig torch(on the machine, cannot be separated).
1X 110V to 220V convert plug. Item Processing Time: The processing time for a specific order varies with the product type and stock status. If you have any issue, you can just give us a message, and we give you full resolve.Please be patient when contacting us, all messages will be replied within 24 hours. Please let us know immediately if a package is damaged upon arrival. This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\MIG Welders". The seller is "usawelduk" and is located in this country: CN.
This item can be shipped worldwide.