It is used in locksmith's workshops, assembly repair shops. The 224 15 Dual Pulse Synergy model will enable the combination of low-alloy and unalloyed steels as well as magnesium, aluminum, nickel, copper and their alloys. Magnum MIG 224 15 DUAL PULS can also be used for thin sheet metal processing, especially in the automotive industry.
The welder allows to regulate all pulse parameters such as: gas flow before and after welding, frequency, balance, peak current, base current, drop time. Full control of pulse parameters allows you to perfectly adjust the device to our needs.
The welder gives the possibility of pulse current welding, which affects the concentration of the arc and the shape of the weld, and also allows the welding of thin elements. Thanks to this function the device produces two currents and jumps between them in micro cycles.In this way, it is easier to obtain the appropriate shape and dimensions of the weld. The welding handle is equipped with teflon insert and the device has a special roller. This allows to weld aluminium. In MIG MAG mode we have the possibility of manual settings or the use of automatic synergy programs. FeC/Co2 - FeC/Co2 - MAG welding of carbon steels with CO2 shielding FeC/ArCo2 - MAG welding of carbon steels with Ar + CO2 308-316 -Welding of stainless steels by MIG method, in argon shielding with admixture of 2% CO2, or in pure argon AlMg5 -Welding of aluminum alloys with magnesium, MIG method, in argon shielding AlSi5 - Welding of aluminum alloys with silicon, MIG method, in argon shielding. Synergy (electronic microprocessor control which automatically selects the parameters of work depending on the wire diameter, type and thickness of material), - Dual Pulse Highest quality welds, especially made of stainless steel and aluminium.
, - Soldering Brazing is used to join thin sheets coated with a layer of zinc or thin sheets made of stainless steel and various combinations, including acid-resistant steel of ordinary quality steel or copper to steel. , - Inductivity regulation allowing less heat to be introduced in place of welding. The sheet does not deform and the protective layer of zinc is not damaged, useful for solder welding, - 4-feeder roller is a fully professional feeder made of die-cast aluminum.
It is equipped with 4 rollers driven by gear wheels. It is designed to work under heavy load. , - Hot Start, Arc Force, 2T/4T switch, VRD, - Memory, - Possible to connect the TIG holder (TIG Lift), - Self shielding wire welding, - Spot welding, - Pre gas, post gas, - Digital control, - Cooling by fan. 5-15 kg (D200 - 200mm, D300 - 300mm). 0.8, 1.0, 1.2 [mm].
TIG: 5 ÷ 95 [%]. 0-10 [s] 0,1-50 [s].