Synergic welding machine SHERMAN DIGIMIG 200 SYNERGIC is the most innovative device for manual welding of steel and non-ferrous metals with the use of MIG/MAG, MMA (covered electrode) and Lift TIG methods. The device can also be used for solder welding of CuSi3 thin (up to 3 mm) galvanized sheets. The SHERMAN welding machine is a multifunctional shuttering machine allowing MIG/MAG, MMA and TIG LIFT welding.
The device uses a synergic panel, which significantly simplifies operation and allows for use by people with little experience. The synergy mode allows less experienced users to select welding parameters. In this mode, the device automatically selects the welding current and wire feed rate according to the type of material to be welded and the diameter of the electrode wire.
It is possible to correct the welding voltage. Manual mode allows the user to adjust the welding voltage and wire feed speed. It is also possible to select the wire diameter and the type of material to be welded, which changes the operating characteristics of the device.In MIG MAG mode we have the possibility of manual settings or the use of automatic synergy programs. Fe CO2 - welding of carbon steels with CO2 shielding.
Wire diameter: 0.6/0.8/1.0 Fe Ar+CO2 - welding of carbon steels in Ar/CO2 shielding. Wire diameter: 0.6/0.8/1.0 - The recommended mixture ratio is 82% Ar 18% CO2 Flux - welding with self shielding wire. Wire diameter: 1.0 Al Ar - welding of argon shielded aluminium alloys.
Wire diameter: 1.0/1.2 SS Ar+CO2 - stainless steel welding - Wire diameter: 0.8. Synergy (electronic microprocessor control which automatically selects the parameters of work depending on the wire diameter, type and thickness of material), - Soldering Brazing is used to join thin sheets coated with a layer of zinc or thin sheets made of stainless steel and various combinations, including acid-resistant steel of ordinary quality steel or copper to steel. , - Inductivity regulation allowing less heat to be introduced in place of welding. The sheet does not deform and the protective layer of zinc is not damaged, useful for solder welding, - Spool Gun the device has a possibility to connect a spool gun, which has a built-in wire feeder. It is useful for welding in hard to reach places and at heights, - Hot Start, Arc Force, 2T/4T switch, VRD, - Possible to connect the TIG holder (TIG Lift), - Self shielding wire welding, - Memory (possibility to save settings), - Digital control, - Cooling by fan.
MIG/MAG - 45% 200A, TIG DC - 60% 200A, MMA/ARC - 60% 180A. 65 V (9V with VRD). 0.6, 0.8, 1.0, 1.2 [mm]. 1.6 - 5.0 [mm].
480 x 210 x 330 mm. This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\MIG Welders". The seller is "bestregula" and is located in this country: PL. This item can be shipped worldwide.