MIG/MAG Welding Machine Inert Gas Welding FCAW 230 V 90 A Coil 100mm

Expert customer service in 9 languages. MIG/MAG welding machine - 90 A - IGBT. Wire diameter: 0.6/0.8/0.9 mm.

Compact - for wire spools up to 100 mm diameter. Powerful - welding current up to 90 A with a rotary control. Flexible - easy selection of the wire diameter from 0.6 - 0.9 mm. Modern - optimally coordinated welding parameters with an IGBT inverter.

Practical - operating instructions can be called up using the QR code on the housing. Do you have a question? With the MIG MAG welding machine you get the latest IGBT technology in a compact casing. It impresses with its reliable performance values, which you can use to weld with welding wire quickly and easily. If you need to weld without gas, you can also use a flux wire with the welding device. The MIG MAG welding machine impresses with a maximum welding current of 90 A if you want to carry out minor repair or maintenance work.

The welding current is set from 40 A to 90 A using a large rotary control. At the same time, an optimal wire speed of 2-11 m / min is determined. The slim but robust casing made of carbon steel holds wire spools up to a diameter of 100 mm. Use technologies from Stamos Germany for MIG MAG welding!

Compact MIG MAG welding machine up to 90 A. With the MIG/MAG welding machine you get the latest IGBT technology in a compact casing. Easy to use and powerful in MIG MAG welding.

At the same time, an optimal wire speed of 2-11 m/min is determined. With modern IGBT inverter technology, you always have the optimal setting for your current strength.

The slim but robust casing made of carbon steel holds wire spools up to a diameter of Carbon steel mm. For an optimal wire feed, you can select a wire diameter from 0.6 to 0.9 mm directly on the device.

In conjunction with the appropriate shielding gas, very good weld seams can be produced quickly and efficiently with different material thicknesses, the deformation of the materials can be reduced to a minimum. If you want to refer to the operating instructions, you will find a QR code on the device. You always have direct access to the document.

The MIG/ MAG welding machine is designed for various metalworking projects in production, workshops, metalworking shops or trades. In MIG welding, inert gases are used for copper, magnesium and other non-ferrous metals and their alloys; MAG welding with active gases is optimal for structural steel, steel and most of their alloys. You can also use filler wire for the MIG MAG welding machine and use the FCAW welding method.

You do not need any additional gas for this, as the shielding gas is already integrated in the filler wire. Accordingly, this device is remarkably handy, allowing you not only to weld from whichever position you require, but also outdoors. Its versatility makes it suitable for a wide range of small metalwork, repairs or base welding work on cars. Allow yourself to be convinced by high quality and excellent service - order a MIG/MAG welding machine from Stamos Germany today!

35 x 13.5 x 25 cm. 47.5 x 21.5 x 32 cm. IGBT = insulated-gate bipolar transistor. IGBT is a bipolar transistor with an insulated gate electrode. This semi-conducting device is being increasingly used in power electronics because it combines the advantages of two transistor types: the easy controls of the field effect transistor and the fast switching and high breakdown voltage of the bipolar transistor.

The IGBT also offers some robustness against short circuits because it limits the electrical continuity. IGBTs are a further development of MOSFET technology. Powerful fans ensure an optimal removal of heat from the unit.

TIG/MIG and MAG welding require a protective gas. Inert gases, such as argon and helium, as well as active gases (for example carbon dioxide) and other mixtures can be used. The solenoid valve regulates the flow of gas. The valve is operated via a button on the torch. On the back of every welding machine is a screw with an earthing mark.

Before use, earth the unit via a cross-section cable, which must be at least 6 mm². This device works with a 1-phase connection (230 V +/- 10 %). Welding with wire feed in a protective atmosphere. MIG/MAG welding machine S-MIG 90. MIG/MAG welding torch with cable (2 m).

Power cable (1.9 m). The Stamos Welding Group offers you a variety of different and modern welding devices at extremely low prices. No matter if plasma cutters, combined devices, MIG MAG, TIG or E-Hand welders - products by the Stamos Welding Group are made for daily continuous operation and live up to every expectation. The Stamos Welding Group lays much emphasis on development and improvement of the product range.

We are proud to use exclusively the best materials in our machines. Go for the brand products by the Stamos Welding Group and weld like professionals! This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\MIG Welders".kingdom" and is located in this country: DE. This item can be shipped to United Kingdom.

MPN: 10021285
Brand: Stamos
Model: S-MIG 90
Voltage: 230
VendorProductNumber: S-MIG 90
Product details 4: Wire diameter: 0.6/0.8/0.9 mm
Product details 5: Wire speed: 2-11 m/min
Product type 1: MIG/MAG welding machine
Product type 2: MIG/MAG welder
Product type 3: inert gas welding machine
Product type 4: active gas welding machine
Product details 1: MIG MAG / FCAW
Product details 2: Welding current: 90 A
Product details 3: IGBT inverter
EAN: 4062859049018