WELDMAN ARC 225 inverter welder for welding with direct current (DC)

  

Monday - Friday: 8.00 - 16.00. ARC 225 inverter welder for welding with coated electrodes with direct current (DC). If you are one of the people who like proven and reliable products, be sure to read the following description of the ARC 225 inverter welding machine for welding with direct current electrodes (DC).

It is designed for welding with rutile and basic electrodes up to 5 mm of various grades of steel low-carbon, low-alloy, stainless, etc. The ARC 225 welder has a digital display of the welding current, equipped with a simple lamp system. Front panel LED s indicate connection to power (green LED) or overload shutdown (red LED). During work, we will also certainly need an electronically controlled smooth regulation of the welding current and special protection of the equipment against overload. The ARC 225 inverter welder has functions that facilitate welding.

HOT START (hot start): increases the welding current when striking the arc to facilitate ignition of the electrode - ARC FORCE (arc dynamics): shortens the arc length when increasing the welding current, optimizing the transfer of the molten electrode drop to the workpiece, preventing the arc extinction when the electrode comes into contact with the weld material - ANTI STICK: limits the welding current by preventing the electrode from sticking to the material being welded. The ARC 225 inverter welder can TIG welding by connecting a torch with a gas valve.

Touch ignition of the welding arc as a result of rubbing the tungsten electrode against the workpiece (TIG Scratch). The small and light design makes the ARC 225 i nverter welding machine for welding with coated direct current (DC) electrodes applicable in repair work in workshop conditions as well as in work carried out in the field. Transport is facilitated by equipping the welder with a sturdy shoulder strap. Equipment The welder is equipped with.

2m cable with 200A electrode holder (DX50). 1.6m cable with 300A ground clamp (DX50).

2m power cord with 230V plug. Welding current adjustment range: 20-210. Open circuit voltage [V]: 56. We take unprecedented measures to guarantee your things arrive securely and in place.

We are not in charge of lost or harmed packages. Any item not in "sellable" condition.

Future Changes We are fully entitled to change these terms whenever we wish to do so, the changes will be presented on this page, and different areas we consider proper with the goal that you know about the set of accepted rules of our administration. We save and are qualified for all rights to adjust, modify, change or overhaul these terms at any given time, so please check back from time to time.

Do you have any question?